Demulsifier

Shree chem osd is a totally organic liquid formulation of surfactants and dispersants in a water and soluble in toluene ,xylene, aromatic solvent, crude oil for the demulsification of water in oil and oil in water. shree chem osd capable of performance at room temperature, but with improved speed and percentage of oil removed when applied at temperatures near 60 deg. C (140 deg. F). shree chem osd destabilizes the oil-water interface that surrounds each water particle in the emulsion, replaces the emulsifier molecules (if any), and allows the water to coalesce. shree chem osd is a completely combustible, non-abrasive, non-ash-forming treatment which will improve the quality of the fuel it is added too. characteristics physical appearance: homogenous liquid density: 0. 9 +- 0. 5 solubility: toluene, xylene, crude oil, aromatic solvent ph range: 6. 5 to 8. 0 soluble in water: dispersion advantages does not stay with the water phase, therefore does not contribute to water pollution stays with the fuel and actually improves burning characteristics of the fuel uses lower dosages than most competing products dosage because of the diverse nature of oil and waste amenable to treatment with shree chem osd, specific recommendations have to be made on a case-by-case basis. The dosage of shree chem osd prescribed to break a particular emulsion varies from as little as 1 gallon per 20,000 gallons (50 ppm) of oil to as much as 1 gallon per 10,000 gallons (100 ppm) of oil. A few clients have even found that 20 ppm was more effective than the higher dosages, so we suggest adding the lower levels to your laboratory bench tests to verify the correct dosage for the specific application. Finding the most cost-effective dosage, as well as determining the best conditions of temperature, slow mixing, settling time, etc. , is best done in the laboratory, using a sample of the actual oil or waste and a sample of shree chem osd