Low Air Pressure Industrial Oil Burner
- Customer pickup,
- Courier
- In detail
Constructional features:
The burner body is made of high grade alloy cast iron and is sturdy. The atomizer is stationary and could be easily dismantled for cleaning up the burner. Strict quality control is made at our factory, before the burners are of streamlined construction to reduce frictional losses.
Operation:
The fuel is to be supplied to the burner either by gravity or by a constant pressure pumping system, at a pressure of 0.55-0.85 kg./cm2 (8-12 PSI). Air supply is to be provided by a blower at a pressure of 400-750 mm WG. If the fuel used is a thick oil, eg. Furnace oil, it has to be preheated to bring down its viscosity, to less than 100 Sacs Redwood No. 1, at the burner. When the ambient temperature is below 150C, an outflow heater has to be fitted in the oil service tank for uninterrupted fuel supply to the burner. It is important to filter the furnace oil through reliable coarse and fine oil filters, to ensure clean oil supply to the burner.
The burner output is adjusted by rotating the wheel attached to the oil regulating valve. The length of flame is adjusted by operating the swilled flap valve for the airflow.